Best Skateboard Tools [An Epic + Complete Guide]

If you are serious about boarding, you’ll undoubtedly need the best skateboard tools. We dug in and did a comprehensive overview - so without further ado, let’s get into it.

[Check out the totally rad Ayumu Hirano.]

Recommended Skate Tools

What Skateboard Tools Do I Need?

When it comes to skateboarding, having the right tool(s) can make all the difference. From your skateboard itself to trucks, wheels, and bearings, having the right gear will help you enjoy your skating experience more, and allow you to spend more time shredding confidently and safely!

So, what exactly do you need? Here's a quick rundown of the best skate tools:

T-Tool / Y-Tool: For most shredders out there, a simple T-Tool / Y-Tool will handle 99% of the skate-related scenarios one will ever encounter out in the wild. If you want to be extra prepared, it doesn’t hurt to pack in a Phillips Head #2 screwdriver, but be sure to leave it in a backpack or other safe place where it won’t cause injury.

If you don’t have a dedicated T-Tool / Y-Tool, don’t sweat it! The tools used to repair and maintain a snowboard are super straight forward. While you probably don’t want to carry all this around, you can substitute a T-Tool / Y-Tool with the following:

• Phillips Head Screwdriver #2 or 1/8” allen head.
• 3/8” Socket or Wrench.
• 5/16” Socket or Wrench.
• 10/32” Socket or Wrench.

It’s going to be much more convenient to carry around a pocket-sized T-Tool / Y-Tool compared to all the dedicated tools listed above, especially for beginners, so we’d highly recommend going that route! However, if you’re just hanging out at home, there’s no harm in digging up the tools listed above. They may even work better in some cases!

Do Skate Tools Work On All Skateboards?

The answer to this question is pretty much, yes. However, while most skate tools are designed to work with all types of skateboards, there are some that are specialized for certain boards.

For example, there are some electric skateboards that may require special tools because the hardware is non-standard. So it will depend on the type of skateboard you have and the type of skate tool you're using.

Some skateboard tools are going to come with features that other skate tools do not come with. For example, there are some skate tools that come with axle rethreaders. These can be nice for riders that do a lot of truckstands.

If you're unsure whether or not a skate tool will work with your board, it's always best to consult the manufacturer or an expert before using it. This way, you can be sure that you're using the right tool for the job and avoid damaging your board.

[Want to build a grind box for skateboarding?]

Is A Skateboard Tool Necessary?

A skateboard tool is not a necessary piece of equipment for every skateboarder, but it can be very useful in certain situations. If you are regularly riding your skateboard in skate parks, doing tricks that put stress on the board, and/or changing out parts often, having a skateboard tool on hand can help you make repairs quickly and easily.

Skateboard tools usually include a variety of wrenches and screwdrivers that can be used to tighten or loosen hardware, as well as allen keys for adjusting hardware and some trucks. Some also come with built-in bearing presses for installing or removing bearings or axle rethreaders to fix damaged axles.

Most skateboarders use a skateboard tool because having one handy is just too convenient when something goes wrong with your board. Whether you're tightening loose hardware or replacing damaged parts, a skateboard tool can help you keep your board in good condition and rideable for years to come.

What Is A Skateboard Tool Called?

A skateboard tool is a small, hand-held device used to perform various maintenance and repairs on a skateboard. Skateboard tools typically include a variety of Allen wrenches, screws, and other fasteners, as well as a few specialized tools such as bearing presses and axle rethreaders.

While some skateboarders prefer to do all their own maintenance and repairs, others take their boards to local skate shops for professional help. Either way, having a good set of skateboard tools on hand is essential for keeping your board in top condition.

[How long is a normal skateboard?]

What Is The Most Common Skateboard Tool?

The most common skateboard tool is the T-tool. This is a simple tool that is used to fix just about everything on a skateboard.

Skateboarders often carry an T-tool with them in case they need to make adjustments to their trucks while they are skating. If you are going to carry just one skate tool with you, we recommend the T-tool.

What Is The Difference Between A Skateboard Tool And A Skateboard?

A skateboard tool is a device used to fix or adjust skateboards. Skateboard tools usually have allen wrenches, screwdrivers, and socket wrenches. Some skateboard tools also come with a built-in riser pad installation tool.

A skateboard is a vehicle consisting of a board with four wheels that is propelled by the rider pushing off the ground. Skateboards are used for transportation, for recreation, and for tricks and stunts. Skateboards have been around since the 1950s.

The main difference between a skateboard tool and a skateboard is that a skateboard tool is used to fix or adjust skateboards while a skateboard is a vehicle ridden for transportation, recreation, or tricks and stunts. Skateboard tools usually have allen wrenches, screwdrivers, and socket wrenches while skateboards have four wheels and are propelled by the rider pushing off the ground. Skateboards have been around since the 1950s.

So, in conclusion, the main difference between a skateboard tool and a skateboard is that a skateboard tool is used to fix or adjust skateboards while a skateboard is a vehicle ridden for transportation, recreation, or tricks and stunts.

[How much does a skateboard weigh?]

What Is The Best Skateboard Tool For Tightening The Trucks?

There are a few different skateboard tools that can be used to tighten the trucks, but not all of them are equally effective. The best skateboard tool for tightening the trucks is the wrench. The wrench is designed to fit perfectly onto the axle nuts, making it easy to tighten or loosen them as needed. It's also small and lightweight, so it won't take up much space in your skate bag.

If you don't have a wrench, you can also use a socket set or an adjustable wrench. However, these tools are not as effective as the wrench because they may slip off the axle nuts and cause damage to the threads. Therefore, it's best to use a wrench if possible.

How Much Does A Skateboard Tool Cost?

Skateboarding is a great way to get around, but it can be expensive. One of the things you need to buy is a skateboard tool. They can cost anywhere from $5 to $30. You can find them at your local skate shop or online. Make sure you get a good quality one so it lasts long and can tighten your trucks properly.

[Check out all these rad flavors of Mountain Dew.]

Where Can I Buy Skateboarding Tools?

If you're looking to get into skateboarding, or simply want to update your existing equipment, you might be wondering where you can buy skateboarding tools. The good news is that there are a number of different places where you can find skateboarding gear, both online and offline.

One option is to check out your local skate shop. Skate shops typically carry a wide range of products, including high quality boards, trucks, wheels, mounting hardware and other accessories. They can also be a great resource for advice on what kind of equipment is best for your needs.

Another option is to purchase skateboarding gear online. There are a number of online retailers that sell skateboarding equipment, and you'll often be able to find better deals than you would at a brick-and-mortar store. Just be sure to do your research before making a purchase, as not all online retailers are created equal.

Finally, you can also find skateboarding gear at some sporting goods stores. While you might not have as much of a selection as you would at a dedicated skate shop, you might be able to find some good deals on gear if you know where to look.

No matter where you decide to purchase your skateboarding equipment, be sure to do your research and choose the option that best suits your needs and budget. With a little effort, you should be able to find everything you need to get started or upgrade your existing setup.

What Is A Skateboard T-Tool?

A skateboard T-Tool, or T Skate Tool, is a specialized tool that is used to tighten and loosen the trucks on a skateboard. The tool consists of two main parts: a handle and a socket. The handle is usually made of metal or plastic, and the socket is designed to fit over the kingpin nut on the truck.

The skateboard T-Tool is an essential piece of equipment for any serious skater, as it allows them to make quick adjustments to their trucks without having to remove their wheels. It's also a good idea to have a T-Tool handy in case you ever need to make emergency repairs while you're out skating.

[Here is how to clean your skateboard bearings with household items.]

Can You Use Skateboard Tools On A Scooter?

The simple answer is yes, you can use skateboard tools on a scooter. Skateboard tools are designed to work with the trucks and bearings of a skateboard, and since a scooter has similar components, they will be compatible. That said, there are a few things to keep in mind when using skateboard tools on a scooter.

First, it's important to make sure that the skateboard tool you're using is the right size for the component you're working on. While most skateboard trucks are standard size, some scooters may have larger or smaller components that require a different sized tool.

Second, be careful not to over-tighten or damage the components you're working on. Skateboard trucks and bearings are designed to be tight, but over-tightening can cause damage.

Overall, using skateboard tools on a scooter is perfectly fine as long as you're careful and use the right size tool for the job. With a little care and caution, you can keep your scooter running smoothly for years to come.

Do You Need A Skate Tool To Assemble A Skateboard?

Assembling a skateboard is not as difficult as it may seem, and you certainly don't need a skate tool to do it. However, having a skate tool can make the process much easier and faster.

A skate tool is basically a multi-tool that has all the tools you need to assemble a skateboard. It will have hex wrenches of various sizes, Phillips and flathead screwdrivers, and sometimes even an allen key. This means that you won't have to go searching for all the different tools you need - they'll all be in one place.

Skate tools also usually come with built-in bearing presses. This means that you can press the skateboard bearings into place without having to use a separate tool. This can make the process of assembling a skateboard much easier, especially if you're new to it.

So, do you need a skate tool to assemble a skateboard? No, you don't technically need one. But having one will make the process much easier and faster.

[See these rad wheels from Orangatang.]

Other Factors To Consider

If you feel like skateboard tools will improve your ride, you might want to consider a skateboard tool set. It can include a ratchet, grip tape, axle re-threader, t-tool, y-tool, Phillips screwdriver and Allen head.

A tool kit can keep everything you need in one place and can include multi-functional tools to fit all different sizes of skateboards. These tools can even be used for longboards, penny boards, skateboard wheels, scooters and roller skates.

All-in-one tools will save you money. We highly recommend the Zeato all-in-one tool, or the Bona skate tool. If you decide to purchase online, like on Amazon, make sure to read the reviews to see if you are purchasing a high quality skate tool and that you can return to get your money back if it doesn’t fit your skateboard.

You may want to consider carrying a bottle opener as well in case you need to crack open a drink when you are on the go. Some stickers to decorate your skateboard deck are another fun option.

The Bottom Line On The Best Skateboard Tools

A multi functional skateboard tool will allow you to fix pretty much anything - which is why we did these skate tool review. Whether you have bad bushings, an issue with the sizes of sockets on your board - or something else entirely - we’ve got you covered.

There are some parts of your board with easy accessibility - but for others, you may want to take it in to a skate shop. We hope you liked this article, and if so - be sure to check out some of our other in-depth guides.